Tips for Improving Chinese Lathe Chuck Accuracy

I was asked by a viewer how I achieve good accuracy with my 3-Jaw Chinese Lathe Chuck Here are some tips you may find useful Thanks for watching Please leave comment and consider subscribing... Read More...

How To Make A Low Cost Indexing Chuck Assembly For The Bench Or Pillar Drill

Making and using a home made drilling indexing chuck assembly for the bench or pillar drill press Using scrap metal such as cast iron body building weights... Read More...

Dialing work off center in a lathe using a 4-jaw chuck

Dialing a square piece of stock that requires machining on one corner A 4-jaw chuck and lathe are used... Read More...

LATHE CHUCK (3 JAW AND 4 JAW)( ) LEARN AND GROW

On this channel you can get education and knowledge for general issues and topics... Read More...

R HM Lathe chuck ZS Hi-Tru

Geared scroll chucks in steel design ZS Hi-Tru, with which the workpiece can be adjusted very sensitively to the desired concentricity via 3 tangentially arranged adjusting spindles Optimized... Read More...

Dialing in a 4-jaw lathe chuck

This is an easy way to dial in a 4-jaw chuck on a lathe Two cameras were used to see two views at once I require my high school students to perform this skill to an accuracy of 1/1000... Read More...

Myford Lathe Restoration - Part 4 Pratt Burnerd Chuck

Part 4: Grinding the jaws on a Pratt Burnerd 3 jaw chuck Refurbishing a stuffed 3 jaw chuck back to serviceable condition Including treating/converting surface rust with citric acid And... Read More...

A fixture to install or remove lathe chucks

I hope this helps you guys with the whole chuck installing and removing My 3 jaw with the fixture weighs over 160 pounds so this really healps me This can be used for 3 jaw or 4 jaw chucks... Read More...

Homemade Lathe Chuck. 4-jaw Lathe Chuck for Woodwork

How to make a 4 jaw lathe chuck using plywood Ad cogitandum et agendum homo natus est A chuck is a specialized type of clamp It is used to hold an object with radial symmetry, especially a... Read More...

Making A Lathe Chuck Back Plate

Finally got around to building a back plate for my 6 4 jaw lathe chuck... Read More...

Lathe chuck key, made with W-1 steel - The heat treatment process

In this video, my friend Philippe from Phils project, just made himself a new chuck key for his lathe He used some W-1 alloy steel, he could do the heat treatment with a torch, since this... Read More...

How to Make a Faceplate Adjustable Chuck

In this video Im going to show you how I made these accessories for the lathe I made a faceplate and a adjustable chuck to turn bowls Note: The self centering Longworth chuck was named... Read More...

Pratt Burnerd Manual Chucks

An overview of Pratt-Burnerds Manual Chucks Range For more information email: mail@600ukcom This video was produced by MTDCNCcom and is hosted here, in addition to their own sites, with... Read More...

Machine Shop Maintenance Truing up a 3-Jaw Chuck

Here is a fairly simple procedure you can use to true up excessive run-out in a worn 3-jaw chuck Music License for Intro/Outro Music - Better and Better, by Joel Hunger: Im Joel Hunger,... Read More...

Lathe three jaw chuck alignment grinding

My lathes three jaw chuck has wear and the jaws are slightly sprung The steel plate applies loading to the chuck scroll plate in the correct direction allowing the chuck to be tightened and... Read More...

Truing the lathe chuck with a dremel on a South Bend lathe

This is how I trued the chuck jaws on my 9 inch South Bend lathe I just used a cheap Dremel tool and made a homemade bracket from wood The final result was fantastic without having to buy... Read More...

Dialing in a 4-jaw Lathe Chuck

Using a dial indicator to dial in a 4-jaw chuck on a lathe... Read More...

Making a 4-jaw lathe chuck

A homemade wooden 4-jaw lathe chuck, and face plate, for bowl turning Not exactly the safest thing to make! http://woodgearsca/lathe/chuckhtml Plans for the lathe available here: http://woodge... Read More...

How to clean the Mini Lathe Chuck

I made this 4 minutes video to show you how easy it is to clean your chinese mini lathe chuck in less than 10 minutes To clean the chuck from dirt and old grease and oils I used white spirits... Read More...

How to Make a Lathe Chuck

Original lathe tutorial video: https://wwwyoutubecom/watch?v=7aFtgQh-MRg Lathe playlist: https://wwwyoutubecom/playlist?list=PLiBJ_D3_ZSgJp9JyQQMkXQJxZk469IgBt The CNC machine used in this... Read More...

Easily pad lathe chuck jaws with a strip of used sanding belt

A neat trick, plus a few workshop tips Camera: Nikon L820... Read More...

How to Turn a Bowl Using a Four-Jaw Scroll Chuck

A scroll chuck can simplify the process of mounting bowl blanks by eliminating the need for a faceplate In this video, expert woodturner Ernie Conover demonstrates the process of using a scroll... Read More...

Lathe Chuck Backing Plate

In This short video we fabricate a backing plate for my Rohm four jaw lathe chuck I could have used this the other day setting up the Wabble eccentric in the lathe Most of you have seen me... Read More...

ME 110 Product Case Study Lathe Chuck

This video examines the manufacturing processes used to create this 3 jaw lathe chuck Group members: Marshall Hoaglan, Ryan Thomas, and Tyler Broder... Read More...